How to measure skateboard wheels

How to measure skateboard wheels

Skateboarding is a relatively risky sport and requires relatively skilled skating techniques. To get a great experience playing this sport, you need to install the parts of the skateboard correctly. One of the most essential parts of a skateboard is the wheels. How to measure skateboard wheels in the simplest and most accurate way? That is probably the issue that many people are interested in. Dive into our article to get a better understanding of this now.

Overview of skateboard wheels

Before learning how to measure skateboard wheels, let’s explore the basics of skateboard wheels. Most skateboard wheels are made of durable urethane material. When choosing wheels, these are the parameters that you need to pay attention to:


Dimensions are measured by the diameter of the wheel in millimeters. Skateboard wheels are commonly used in the range of 48mm to 54mm. The 5mm difference may seem insignificant, but for experienced skaters, every millimeter makes a difference.

Larger wheels will go more quickly, and also increase the height of the board to the ground. Smaller wheels will bring the board closer to the ground, reduce roll and control the board.

Street skaters and technical players often choose small, lightweight wheels. The reason is that it makes it easier to do trick flips. On the contrary, the large wheel allows users to increase speed faster and is convenient for the skatepark, ramp.

To get used to the board more easily, you should start with a small wheel about 48mm to 50mm.


The hardness of the wheel is calculated according to the A or Duro parameter with a scale from 0A to 100A. The higher this parameter, the stiffer the wheel.

The skater that is more of a street trick usually uses a hardness of 99A to 103A. This wheel hardness is suitable for skilled skaters and trick skaters.

Skater uses boards to move on rough roads and film slides using 80A soft wheels, size 56mm or more.

The Slim type has less contact between the wheel and the road surface, reducing friction, keeping the speed longer, light, and easy to slip.

Type Basic, Conical surface much in contact with the road surface, creating a lot of friction. Therefore, the skateboard is easy to slow down. More grip area should reduce slipperiness, be hard to slide, go compacted.

Big wheel companies like Spitfire, Bones produce a lot of different shapes. Materials are also varied, suitable for disparate surfaces and terrain as well as skateboarding techniques. If you are new to skating, you should start with the most basic types and practice progress. Next, you will feel and find yourself the most suitable wheel.

How to replace the wheels?

  • Step 1: Remove the old wheel system from the skateboard. It is best to remove the entire shaft assembly for easy handling.
  • Step 2: Remove the wheel from the axle system.
  • Step 3: Clean or can grease the core to prevent rust and easier to disassemble.
  • Step 4: Install the new wheel on the axle system and reinstall it on the board.

How to measure skateboard wheels?

You should use a ruler with millimeter divisions. The diameter of a skateboard’s wheels ranges from 50mm for street skates to 75mm for long skates.

Very few manufacturers publicly disclose the width of the wheel. In general, however, wider wheels provide balance, stable speed, and a smoother experience. The most suitable skateboard wheel will be between 52-56 mm in size. You will use a ruler to measure the largest diameter of the wheel, which should go through the center of the wheel.

You have known how to measure skateboard wheels most accurately. We hope that this article was beneficial to you. Have a good day.

Leave a Reply

Your email address will not be published.