If you like old music from the 1970s and 1980s, you probably listened to it on a turntable, which you probably still own.
If you don’t, you might have a modern or semi-modern turntable in your house to keep you interested and calm your mind.
Modern music fans may have only heard the phrase “Old is Gold,” but you are the one who really puts it to the test.
Turntables make better sound, but if you remember that awful, annoying sound that came from glitches in the CD path, you may have turned that off because it was too loud.
One thing you would know for sure is that no modern device can beat the quality of a turntable if you keep it in good shape and clean it regularly.
Do you want to hear the beautiful, quiet voice instead of the loud one, without any glitches, pops, or clicks that are meant to be funny?
We’re here to help you figure out how to clean the needle on the turntable without any problems or spending a lot of time or money.
Why You Should Clean Turntable?
When you listen to your turntable, you hear clicks, glitches, and distorted sounds. This is because the needle or stylus keeps hitting dust on your device.
Whatever you said, a tiny needle or stylus keeps going through the grooves or slots on your disk, which are so small that you can’t even see them with your naked eye.
When a dust particle gets into that groove, it gets in the way of the needle and causes it to start scratching the path, which makes a very loud noise.
Also, these tiny dust particles can damage your sensitive stylus, which can cost a lot to fix because you have to buy a new one.
Follow these 4 steps to learn how to clean a turntable needle.
1.Use a brush made of carbon fiber
If you know how to use them right, fiber brushes are one of the best ways to clean your turntable.
First, get a brush with a smooth fiber and turn on your table. Now, gently and at an angle, place your brush on the record’s surface.
Let the record spin for a while, then slowly move your brush to the middle of the record and lift it straight up. This will get rid of the static electricity that your brush has built up.
You can also bring your brush toward yourself. This will throw the dust particles to the side, but it won’t get rid of the electricity. Repeat the same steps over and over until all the dust is gone.
Carbon Fiber is a safe and long-lasting material for your record. We use carbon fiber brushes because this material doesn’t get hot and can’t be scratched. If you accidentally put a little pressure on it, you won’t be able to scratch it.
Carbon fiber also has thermal and electrical properties that keep the record from getting hot right away and store the static charge. This is because the record is made of vinyl, which isn’t very strong and can melt, but sounds good.
If the vinyl gets too hot, it can start to melt. Once it starts to melt, the grooves on your record will get smaller, and the stylus won’t be able to move through that groove. This will hurt your stylus and wear it out over time. If it breaks and hits you, it could hurt you.
The stylus on your record is not as simple as it looks. Even if you use a carbon fiber brush to clean your record, you may still not be able to hear the sound as it was meant to be.
This is because your turntable has a cartridge and something that looks like a stylus arm that connects the cartridge to the stylus and makes sound.
If your record collects dust, which almost all of them do, the dust will also collect on your stylus, which you can see with your own eyes.
Instead of using a record brush like the one above, you can safely get rid of it by using your stylus brush. They are also cheap. But first, remember that both your stylus lever and your cartridge are sensitive, so be careful at all times.
Rub the back of the cartridge with your stylus brush from back to front instead of from side to side or front to back. Do this at least five times, and you’re done. Before every play, try to clean your needle or stylus so it won’t damage your record.
3.Eraser that cleans
People often call these erasers “magic erasers” because they clean up right away, which you’ve probably seen somewhere. This is some kind of sponge that you have to put on the record, then move the needle above it and slowly press it with the needle.
This isn’t that magical, because if you put this eraser under the needle and press it a little, all the dust on the needle will stick to this eraser, and you’re done. You will see a clean needle once you pull it up.
Touching the playable side of a record with your hands can damage both the recorder and the needle.
This is because when you hold your track from a playable surface, the tiny dirt particles on its surface can get transferred from your dirty hands.
4.Use Liquid Removals
Some of you may not like this method because you think liquid can damage the grooves or get into the cartridge. This is not true. There won’t be anything.
If something is stuck in one of the grooves of your record, it would be better to use a liquid instead.
When you use a carbon fiber brush, you can clean dust out of grooves as long as the dust is on top of the groove.
This is because your carbon fiber can’t get all of the dust out of the groove that has settled at the plain. You need something that is liquid and can help move all the dust out, even from the bottom.
Most dust removal liquids are made of alcohol, which doesn’t damage your record chemically like water does, and this is always what you should want. Just put one or two drops of this liquid on your needle brush and rub it on your needle.
The bottom Line: How to clean turntable needle
In this guide about how to clean turntable needles, we’ve talked about five effective, cheaper, and easier ways, as well as some more expensive ones. You can try each one out to see which one works best for you.
Before each play, try to clean your stylus. Most of the time, you’ll have to clean your stylus every 50, 70, or even 100 times you play your record.
This could damage your cartridge and cantilever, if not your stylus, and cause your record to sound bad or dirty.